E.P.D.M, Butyl & Hypalon Sheeting

Home > Sheeting > E.P.D.M, Butyl & Hypalon

E.P.D.M (Ethylene Propylene)

Temperature range -40° + 120°C with excellent resistance to water, steam, ozone ageing and many chemicals. Not suitable for contact with petroleum liquids. These are general properties, which will vary between grades.

RefGradeHardness Shore ASGTensile Strength (MPa)Elongation at Break %ColourSpec Sheet
E80/ECONEconomy Grade EPDM70°1.403.5250BlackDownload
E80Commercial Grade EPDM70°1.405300BlackDownload
E9614High Grade Peroxide Cured70°1.229200BlackDownload
E78WRAS Approved70°1.1512400BlackDownload
E78sWRAS Approved70°1.1512400BlackDownload
E79WRAS Approved80°1.1710250BlackDownload
E81EPDM Food Grade60°1.46500WhiteDownload
E84EPDM M22880°1.1610225BlackDownload
E4580EPDM Soft High Grade50°1.058500BlackDownload
E9566EPDM High Grade Sulphur Cured70°1.37250BlackDownload

Butyl (Isobutylene - Isoprene)

Temperature range -45° + 130°C. Very good weathering resistance. Low gas and moisture permeability. Poor resistance to petroleum based oils and fluids.

RefGradeHardness Shore ASGTensile Strength (MPa)Elongation at Break %ColourSpec Sheet

Hypalon® (Chlorosulphonated Polyethylene)

Temperature range -45° + 140°C. Excellent resistance to ozone, weather, acids, heat and abrasion. Mild resistance to petroleum based fluids.

RefGradeHardness Shore ASGTensile Strength (MPa)Elongation at Break %ColourSpec Sheet
Please note: Care should be taken in selecting the most suitable quality for each application. Advice is available but final responsibility remains with the customer. If you don’t see a product suitable for your requirements above please contact our sales office, as alternatives may be available.